大红山铁矿盲小矿体地质勘探技术思路

目前大红山铁矿400万t/a一期采矿工程已接近尾声，现已转入二期工程。随着矿山主矿体的开采，面临着矿石资源量较少、富余人员增多等问题。因此边部盲小矿体开采显得意义更加重大。矿体边部受控矿地质构造的影响，加之前期探矿工程有限，矿体边部盲小矿体未能得到有效控制。通过对大红山井下主矿体边部尤其是南部靠近侵入体边部隐伏盲小矿体特征的分析，实施了“探边扫盲”生产地质勘探工作，为矿山开采提供了资源补充。     

Enhancement of density and ionic conductivity for garnet-type Li5La3Ta2O12 solid electrolyte by self-consolidation strategy

Garnet-type Li₅La₃Ta₂O₁₂ (LLTaO) solid electrolyte is a potential candidate component for future all-solid-state batteries due to its extraordinary stability against the reaction with molten lithium. In contrast with traditional cold isostatic pressing (CIP) method, which generally pursues ultra-high pressure, this paper tries to enhance the density and ionic conductivity of LLTaO by self-consolidation strategy without the assistance of any pressing operations. A LLTaO bulk with a relative density of 95% is obtained. SEM images reveal that the bulk sample is assembled by large dense particles in size of tens of microns indicating that the interstitial space among the particles has been dramatically minimized. Accordingly, the total ionic conductivity and the bulk ionic conductivity at 30?°C are promoted up about one order of magnitude higher to 2.63?× 10^?5 S?cm^?1 and 1.41?×?10^?4 S?cm^?1, respectively. Moreover, the lithium ionic migration network in the crystalline unit cell of LLTaO is first explored from its assembled way. A hexagon-like basic unit with tetrahedral Li1 joint sites and Li1- - Li1 edges is identified. The tetrahedral Li1 sites act as crucial junctions for the transportation of lithium ions. This work would significantly stimulate the development of LLTaO electrolyte membrane technology.     

Structure,electrical and dielectric properties of Ca substituted BaTiO3 ceramics

BaTi_1-xCa_xO_3-x [BTC100x] ceramics were synthesized via solid-state reaction method. Effect of Ca substitution on the structure, electrical and dielectric properties of BTC100x ceramics was systematically investigated. Calcined BTC100x powders were in tetragonal phase when x?≤?0.01, whereas transformed to cubic at x?>?0.01. Additionally, the diffraction peak (200) shifted to lower angles with increasing x, indicating increased unit cell volume. Meanwhile, Ba_0.97Ca_0.03TiO₃ [BC3T] ceramic was prepared and studied, to compare with BaTi_0.97Ca_0.03O_2.97 (BTC3). It was found that pure BaTiO₃ [BT] and BC3T ceramics had the similar structural and dielectric properties, whereas BTC3 ceramic showed much difference，XRD patterns, Raman spectrum, impedance spectra and dielectric-temperature spectra provided strong evidence of Ca²⁺ substitution at Ti site in BT lattice. Finally, BTC100x ceramics were produced and dielectric properties were investigated. With increasing x, the Curie temperature decreased from 128?°C (BT) to 42?°C (BTC5).     

Electrolytic synthesis of TiC/SiC nanocomposites from high titanium slag in molten salt

The molten salt electrolytic method for the preparation of titanium carbide and silicon carbide composites has been subjected to a systematic investigation by experimental analyses and thermodynamic calculations. It has been confirmed that the electrolysis of high titanium slag in the presence of mixed graphite powders generates intermediates CaTiO₃, Ti₂O₃, TiO, Fe₃Si and objective carbonous products TiC/SiC. It has been furthermore found that the deoxidization process depends critically on a number of process parameters, namely, electrolyte composition, graphitic regime, reaction temperature, cell voltage and reaction time. After careful optimization of these parameters, TiC/SiC nanocomposites with particle sizes of 10–174 nm has been produced by electrolysis of high titanium slag and graphite mixtures in molar ratio of 1:2 referred to Ti:C under 3.2 V at 900 °C for 6 h in 1 mol%CaO-CaCl₂-NaCl molten salt and with particle sizes of 12 nm~207 nm in 1 mol%CaO-CaCl₂ electrolyte.     

Three‐dimensional color prediction modeling of single‐ and double‐layered woven fabrics

In this research, the three‐dimensional structural and colorimetric modeling of three‐dimensional woven fabrics was conducted for accurate color predictions. One‐hundred forty single‐ and double‐layered woven samples in a wide range of colors were produced. With the consideration of their three‐dimensional structural parameters, three‐dimensional color prediction models, K/S‐, R‐, and L*a*b*‐based models, were developed through the optimization of previous two‐dimensional models which have been reported to be the three most accurate models for single‐layered woven structures. The accuracy of the new three‐dimensional models was evaluated by calculating the color differences ΔL*, ΔC*, Δh°, and ΔE_CMC(2:1) between the measured and the predicted colors of the samples, and then the error values were compared to those of the two‐dimensional models. As a result, there has been an overall improvement in color predictions of all models with a decrease in ΔE_CMC(2:1) from 10.30 to 5.25 units on average after the three‐dimensional modeling.     

Garnet-like Li7-xLa3Zr2-xNbxO12 (x = 0−0.7) solid state electrolytes enhanced by self-consolidation strategy

Garnet-like Li₇La₃Zr₂O₁₂ electrolytes with Nb doping are synthesized by self-consolidation method. Different from conventional methods such as cold or hot isostatic pressing, not any pressing assistance is employed throughout the preparation process. Although the preparation process is dramatically simplified, both density and ionic conductivity of the obtained samples are enhanced. Nb-doped content plays a key role in the sintering of the packed precursor powders and in the structure stabilization of the obtained bulk samples. The optimized 0.60?mol Nb-doped sample with relative density of 94%, fine particle boundaries, and solitary cubic structure possesses the maximum total ionic conductivity of 5.22?×?10^?4?S?cm^?1 at 30?°C, which is comparable to the highest reported value of the samples prepared by conventional pressing methods. This work verifies that self-consolidation strategy is effective, reliable, and productive for the preparation of cubic Li₇La₃Zr₂O₁₂ electrolyte, which would significantly facilitate the development of ceramic electrolyte membrane technology.     

Effects of spark plasma sintering on ferroelectricity of 0.8Bi3.15Nd0.85Ti3O12-0.2CoFe2O4 composite ceramic

The 0.8Bi_3.15Nd_0.85Ti₃O₁₂ (BNdT)-0.2CoFe₂O₄ (CFO) composite multiferroic ceramics have been fabricated by spark plasma sintering (SPS) at 850?°C. The relative density of as-sintered SPS ceramic reaches 97.4 (±0.3)%. The composites are composed of pure BNdT and CFO phases without any preferred c-orientation. The a-orientation preference is more obvious perpendicular to the pressure direction. The average grain-sizes of BNdT and CFO are 163 and 146?nm, respectively. The BNdT phase has more grains below 100?nm (～20%). The super energy-dispersive X-ray analyses suggest no serious reaction between BNdT and CFO. The Raman spectrum verifies the nano-structure of the SPS ceramic via the broadening bands and peak shifts. The Curie temperature of the SPS ceramic declines to 560?°C with stabilized dielectric loss. The grain boundary resistance plays a dominant role on impedance above 700?°C. The remanent polarization approaches to 15.2?μC/cm² (300?kV/cm) with lower coercive fields (?89/+95?kV/cm).     

Inherent safer design for chemical process of 1,4-dioldiacetate-2-butene oxidized by ozone

Abstract

Oxidation reaction is the typical thermal runaway reaction, and the reaction of 1, 4-dioldiacetate-2-Butene oxidized by ozone was investigated in this study. Firstly, the thermal hazards of the oxidative exothermic reactions were identified and evaluated combined process risk assessment method. The Qualitative Assessment for Inherently Safer Design (QAISD) was used to identify the risk of the reaction process. Meanwhile, the Reaction Calorimeter (RC1^e) was used to obtain the thermal properties of the oxidation reaction. Then the inherent safer designs (ISD) were proposed according to the risk assessment results to increase the level of safety of chemical industry technique. 1) ISD I: reaction temperature was improved to –5?°C, and ventilation rate was improved to 200?L?h^?1. 2) ISDII: using a tubular reactor as reaction vessel. The results indicated that the severity of the reaction hazard was reduced by 43%, and safety was improved significantly via two ISDs. Moreover, the inherent safety level of the reaction was increased by 63% and 43.4% via ISD Iand II, respectively. The reaction process get closer to inherent safety theories of “minimize,” “substitute,” and “moderate”.     

Adaptive global stabilization of chained-form systems with multiple disturbance and strong nonlinear drifts

This article investigates the stabilization of chained-form nonholonomic systems with strong drifts, multidisturbances, and unknown constant parameters. The disturbances include the matched disturbance with bounded variation and the unknown time-varying unmatched disturbance. A nonlinear disturbance observer is skillfully constructed to evaluate the matched disturbance and a disturbance estimation is used in the virtual controls to compensate the unmatched disturbance. By using a new input-to-state scaling scheme, the original nonholonomic system is transformed into a strict feedback form. Combining back-stepping technique with disturbance observer-based control (DOBC), a composite DOBC and global adaptive stabilization controller is proposed. A switching strategy based on control input magnitude instead of time is proposed to avoid uncontrollability. By using Lyapunov tools, all the states in the system are proved to be uniformly ultimate bounded. Simulations demonstrate the effectiveness of the proposed strategies.     

Hybrid self-inertia weight adaptive particle swarm optimisation with local search using C4.5 decision tree classifier for feature selection problems

ABSTRACT

Feature selection is an important task to improve the classifier’s accuracy and to decrease the problem size. A number of methodologies have been presented for feature selection problems using metaheuristic algorithms. In this paper, an improved self-adaptive inertia weight particle swarm optimisation with local search and combined with C4.5 classifiers for feature selection algorithm is proposed. In this proposed algorithm, the gradient base local search with its capacity of helping to explore the feature space and an improved self-adaptive inertia weight particle swarm optimisation with its ability to converge a best global solution in the search space. Experimental results have verified that the SIW-APSO-LS performed well compared with other state of art feature selection techniques on a suit of 16 standard data sets.